KiwiSDR Audio Mode Selection Buttons

Audio mode selections are made using the row of buttons on the Control Panel. For instance, in the image above the green text for the LSB button indicates that the Lower Side Band receive mode is selected.

KiwiSDR Audio Modes
AM Amplitude Modulation	Standard double sideband Amplitude Modulation.	• Amplitude Modulation Information  🔗 Wikipedia: Amplitude Modulation
SAM Synchronous Amplitude Modulation	Several variations but basically filters to use one or both of the sidebands.	• SAM Information  🔗 KiwiSDR FAQ: SAM
DRM Digital Radio Mondiale	Digital radio broadcasts.	• DRM Information  🔗 KiwiSDR FAQ: DRM
LSB Lower Sideband	Sets the receive BW for Lower Sideband.	Single-Sideband Information • 🔗 Wikipedia: Single-Sideband Modulation
USB Upper Sideband	Sets the receive BW for Upper Sideband.	Single-Sideband Information • 🔗 Wikipedia: Single-Sideband Modulation
CW CW (for Morse Code)	Sets the receive BW for continuous wave reception.	Note: there is a CW to text decoder extension available in the extensions menu.
NBFM Narrowband Frequency Modulation	Pretty much only used on 10 meters above 29MHz.	FM modulation is generally not used on the amateur HF bands because of it's wider bandwidth.
IQ IQ Data Forwarding	IQ Data is routed to the browser's stereo audio data stream.	It allows a virtual audio cable (VAC) program to then route the data to another program.

---